High vacuum transformer oil dryer

ApplicationThis machine is applied to purify the unqualified transformer oil, mutual inductor oil, switch oil and other insulation oil. Main FeaturesWith high vacuum pump. Vacuum degree can up to -0.098 Mpa. 3D flashing by vacuum, it can eliminate the liquid water quickly. And Use UK micro technology to remove the trace wat

Featured Products


High vacuum Transformer Oil Dryer

High vacuum Transformer Oil Dryer



Application

  1. This machine is applied to purify the unqualified transformer oil, mutual inductor oil,
switch oil and other insulation oil.
 

Main Features

  1. With high vacuum pump. Vacuum degree can up to -0.098 Mpa.
  2. 3D flashing by vacuum, it can eliminate the liquid water quickly. And Use UK micro technology to remove the trace water and other dissolved water. The final oil water content can be <= 5ppm, gas content can be < 0.1%
  3. With Z type heater design, and the face of the heater is smooth, it can heating uniformity, avoid extra gas
  4. Three stages filters, it combines double FH trapezoidal network and high polymer material absorption technology, the particle's precision can up to 5μ
  5. We use fluoric cushion not normal cushion, and double welding of the machine, with great sealing performance, can avoid extra gas and have longer life
  6. With automatically oil level control device

Working principle

  1. When we turn on the machine, start to purify the oil, the oil will come into the primary filter
first by the vacuum negative pressure. To purify the bigger particles, normally 80μ
  1.  After that oil will flow into the heater, then into the vacuum tank to dehydration and
degassing by the vacuum
  1. Then the oil flow through the second filter, normally 50μ
  2. Then the oil will flow into the fine filter, normally 5μ
  3. Oil comes out or keep the loop working          

Maintenance

  1. After a certain period of running, the machine should be checked to see whether:
  2. The electrical control system is safe and reliable;
  3. The temperature controller is sensitive, reliable and accurate;
  4. Oil seals of the pump shaft are broken with leakage;
  5. There is any blockage with the running system and any abnormal noise with pumps or related motors;
  6. There is any air or oil leakage with the oil running system and at sealing joints.
  7. After each 3000 hours' running, grease shall be replenished to prevent motors from being burnt.
  8. Special vacuum pump oil or lubricating oil N46 should be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
  9. If the machine will not be used over 1 month, Place the machine in a dry environment with the panel door and all valves closed, and the machine proper protected by a covering.
  10. ParametersUnitZY-10ZY-20
    ZYA-20
    ZY-30
    ZYA-30
    ZY-50
    ZYA-50
    ZY-100
    ZYA-100
    ZY-150
    ZYA-150
    ZY-200
    ZYA-200
    ZY-300
    ZYA-300
    Flow rateL/min10203050100150200300
    Working vacuumMPa-0.06 ~ -0.095
    Working pressureMPa0.40.4≤0.40.50.50.50.50.5
    Breakdown voltageKV≥55≥55≥55≥60≥60≥60≥60≥65
    MoisturePPM≤5
    Gas content%≤0.1
    Impurity contentμm≤5
    Temperature rangeºC10 ~ 100
    Power supply 50HZ380V(being regulated according to customer's option)
    Working noisedB(A)6163707075707070
    Heating powerKW111315304852.557.560
    Total powerKW12.514.516.533.551.557.565.568
    Inlet/outlet caliber  mmφ25φ25φ25φ32φ42φ50φ50φ60
    WeightKg150200260300400450550600
    SizeLmm10501050110012001450160018001900
     Wmm750750800950950110012001200
     Hmm13501350140015001650180019001900
Pre-sale Service

According to customer's demands, we recommend the most suitable machine with high cost effective.

Free on-site installation, debugging and technical training (offered by strictly trained technology application engineers)

Offer OEM service.

After-sale Service

We offer the door-to-door after sales service for installation and debugging.

The warranty period is 24 months from commissioning acceptance date on.

We build instrument service profile for our clients to record the product service and maintenance conditions.

Company Information
 
  1. We are the professional manufacturer and exporter of oil purifier in China
  2. We are in this field since 2003
  3. We are the 13-year golden supplier on Alibaba
  4. We offer our customers professional products at competitive price
  5. We offer our customer reliable lifetime after-sales service
High vacuum Transformer Oil Dryer



High vacuum Transformer Oil Dryer
Packing and Delivery

Safe and Timely Transportation

Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.

Carefully check every packing detail before delivery to avoid any troubles during the transportation.

Appointed logistics company could be used according to customers demands.

Do our best to make sure customers can get the goods in time.
High vacuum Transformer Oil Dryer




Post by Sophie
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours