SCM440 SAE4140 42CrMo EN19 1.7225 Special alloy structural steel circle

SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds Product Introduction1.7225 classify in the group of low alloy which provide high strength through combination of Chromium and Molybdinum. This result in impact resistance at low temperature.Selling condition is quenched and tempered. Its convenience

Featured Products

SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds

 Product Introduction
1.7225 classify in the group of low alloy which provide high strength through combination of Chromium and Molybdinum. This result in impact resistance at low temperature.Selling condition is quenched and tempered. Its convenience for further surface hardening in order to enhance surface hardness. Caution is it is not suitable to use at temperature higher than 480c since hardness will sharply fall. Besides, usage or tempering at level 230-270c might cause condition of blue brittleness which will decrease its strength.

42CrMo steel is an ultra-high strength steel with high strength and toughness, good hardenability, no obvious temper
brittleness, high fatigue limit and multiple impact resistance after quenching and tempering, and good low temperature impact toughness.
SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds
Features
  1. Belong to the ultra-high strength steel
  2. 2. High strength and toughness
  3. 3. Good hardenability
Similar Standards
ChineseAmericanGermanJapaneseBritish
GBAISIDINJISBS
42CrMoSAE41401.7225SCM440EN19
Chemical Composition
GradesCSiMnPSCrMoCuNi
41400.38-0.450.17-0.370.5-0.8≤0.035≤0.0350.9-1.20.15-0.25≤0.3≤0.035
42CrMo0.38-0.450.17-0.350.5-0.8≤0.035≤0.0350.9-1.20.15-0.25≤0.03≤0.03
4400.38-0.430.15-0.350.6-0.85≤0.03≤0.030.9-1.20.15-0.3≤0.3≤0.25

Heat Treatment
QuenchingTempering
Heating Temperature/ºCCoolingHardness/HRCHeating Temperature/ºCCoolingHardness/HRC
820-840Oil≥53450-650Air25-40
Applications
  1. Suitable for manufacturing requirment a certain strength and toughness of large and medium-sized plastic mold, such as locomotive traction with the big gear, the supercharger drive gear, pressure vessle, rear axle, gear load connecting rod and a spring clip
  2. Used to under 2000m deep well of oil drill pipe joint and the fishing tool
3. Used for bending machine mould  

Stock Size
Plate  Thickness20-120mm
Width2200mm
Length4000-10000mm
round bar Diameter16-450mm
Length4000-10000mm

Sizes and Conditions

Our steel materials are in different sizes and conditions specially catered to our customers' needs. They come in round bars,  flat bars, plates and block.
The conditions of the materials vary from pre-hardened, hot rolled,annealed, quenched and tempered to surface conditions such as black, pre-machined,griding and polish.
Why choose us?

Quality Assurance from government owned steel mills
At Changfeng , we meticulously source materials only from steel manufacturers to ensure consistency in providing the finest quality steel products for our customers.
Being in the competitive market today, we clearly understand that customers are looking for products that are not only best in class but also affordably priced. We are confident that we are able to ful fil these two equally vital aspects -our customers' continuous support over the past two decades is the most heartfelt recognition to us.
Speedy and Timely Delivery
Knowing that delivering goods to customers' hands on time is as important as providing quality goods, we treat every business transaction as a priority. Be it a raw material or a finished material with machining or heat treatment, every effort will be made to get your purchase order to you in the shortest lead time.
Quality Commitment
In order to realise competitive products to fulfil our customers' demands and quality considerations, our integrated quality and work management system is continuously being improved and developed further. We document this for our customers by having our quality management system certified in accordance with ISO 9001. This measure is accompanied by audits and  recertification's on a regularly prescribed basis.
Our service
We provide quality special steel for all industries.
Orders of any size, any length, ship fast
We carry a unique inventory of specialty special steel
Provide related value-adding services :
metal cutting, sizing, machining (blanking, milling, grinding), and heat treatment.
Sawing for small or large quantities, sawing-to-size.
Excellent customer service

Workshop
SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds
Quality Inspection
SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds
Loading
SCM440 SAE4140 42CrMo EN19 1.7225 Special Alloy Structure Steel Rounds
Contact Us

Contact us for the latest price and more details NOW!







 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours